Skip to Content
amina help center
How-to: install amina S
⚠️ Warning
This product must be installed and serviced by electricians only.
Important Information:
EVSE Tester:
We highly recommend verifying the installation with an EVSE tester.
Steady White LED Light After Installation:
Ensure all levers are pressed down until you hear a click.
Check that the pilot signal wire (all to the left) is not bent.
LED Light:
Sometimes, a steady white light may appear orange.
Use an EVSE tester to trigger different states to see the true color of orange.
If the different states are correct, the installation is fine. You can validate with a car if desired.
Adjusting Amps:
To effectuate the amp adjustment, the fuse must be switched off and on again